1xN Mechanical Fiber Optic Switch
オープン価格
Flyin Optronics’ 1xN Mechanical Fiber Optic Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using a patent pending opto-mechanical configuration and activated via an electrical control signal. The mechanical operation offers ultra-high reliability and fast switching speed as well as bi-directional performance. The MMS fiberoptic switches are true switching solutions for optical networking applications.
説明
Performance Specifications
| Parameter | FY-1XN | |||
|---|---|---|---|---|
| Insertion Loss（dB） | 1<N≤12 | 16<N≤32 | 32<N≤64 | 64<N≤128 |
| Type:0.8 Max:1.0 | Type:0.8 Max:1.0 | Type:1.2 Max:1.5 | Type:1.7 Max:2.0 | |
| Wavelength Range（nm） | 850nm,1260~1620nm | |||
| Operating Wavelength(nm) | 850/1310/1550/1625 | |||
| WaveLength Dependent Loss（dB） | ≤0.25 | |||
| Channel Crosstalk（dB） | MM≥35 SM≥55 | |||
| Return Loss（dB） | MM≥30 SM≥50 | |||
| Polarization Dependent Loss（dB） | ≤0.05 | |||
| WaveLength Dependent Loss（dB） | ≤0.25 | |||
| Temperature Dependent Loss（dB） | ≤0.25 | |||
| Repeatability（dB） | ≤±0.02 | |||
| Power Supply（V） | 5.0 or 12.0 | |||
| Lifetime（time） | ≥10^7 | |||
| Switch Time（ms） | ≤8 | |||
| Transmission Power（mW） | ≤500 | |||
| Operating Temperature(℃) | -20~+70 | |||
| Storage Temperature(℃) | -40~+85 | |||
| Dimension（mm） | 1<N≤12（135×64×32） | 12<N≤16（184×78×36） | 16<N≤32（140×77.5×64） | 31<N≤88（184×156×66） |
| 88<N≤128（184×220×66） | ||||
1、Specifications may change without notice.
2、Above specification are for device without connector.
DB-9 male connector (max.1×8)
| Pin No. | signal Name | I/O | Description |
|---|---|---|---|
| 1 | D0 | Input | TTL,Channel selection bit 0 |
| 2 | D1 | Input | TTL,Channel selection bit 1 |
| 3 | D2 | Input | TTL,Channel selection bit 2 |
| 4 | D3 | Input | TTL,Channel selection bit 3 |
| 5 | /RESET | Input | TTL,Low level reset to channel 0.Highh leve means channel selection bits are effective. |
| 6 | /READY | Onput | TTL,Ready(High=Not ready,Low=Ready). |
| 7 | ERROR | Onput | TTL,Error(High=Error,Low=Not error). |
| 8 | GND | Input | Ground |
| 9 | +5VDC | Input | 5.0±5% VDC Power Supply(max 550mA) |
Channel Selection Table
| Max Channel | Input | Active Channel | |||||||
|---|---|---|---|---|---|---|---|---|---|
| /RESET | D6 | D5 | D4 | D3 | D2 | D1 | D0 | ||
| N=16 | 0 | x | x | x | x | x | x | x | 0 reset |
| 1 | x | x | x | 0 | 0 | 0 | 0 | com → 1 | |
| x | x | x | 0 | 0 | 0 | 1 | com → 2 | ||
| x | x | x | 0 | 0 | 1 | 0 | com → 3 | ||
| x | x | x | ··· | ··· | ··· | ··· | ··· | ||
| x | x | x | 1 | 1 | 1 | 1 | com → 16 | ||
追加情報
| 型番 | 1xN Mechanical Fiber Optic Switch |
|---|---|
| メーカー | Flyin |
Brand
Flyin Optronics
